Regenerative Turbine Pumps
Monoblock model
Stainless steel, super clean and high pressure (max. 1.1 MPa)
Regenerative Turbine Pumps Monoblock model Stainless steel
JHD
Super clean and high pressure regenerative turbine pump
Applications
General industrial cleaning applicationsTransferring pure water
Food and beverage, pharmaceutical and medical applications
Transferring chemical liquid
Features
Prevent contamination due to the compact size and simple structure of these pumps.Regenerative turbine pumps achieve high pressure using a single stage impeller even without high speed rotatio
The contact area between the pump and media is minimized resulting in a clean flow.
Due to the simple structure with minimal holding volume and surface contact area bacterial contamination is minimized as well as reduced leaching of irons from metal parts to ppm levels
SiC x special carbon mechanical seal (-J) available for pure water (low-viscosity liquid) applications
Performance
Specification Data
| SI unit | |||||
| Series | JLD | JHD | JLD-J | JHD-J | |
| Total head | Max. 50 m | Max. 110 m | Max. 50 m | Max. 110 m | |
| Capacity | Max. 60 L/min | Max. 60 L/min | |||
| Fluid temp. | ~90 ℃ | ~80 ℃ | |||
| Connection | Rc thread | ||||
| Material | Casing / cover | SUS304 *2 | |||
| Impeller | SUS304 *2 | ||||
| Mechanical seal | SiC × SiC × PTFE | SiC×Carbon×PTFE | |||
| O-Ring | PTFE | ||||
| Shaft | SUS316L | ||||
| Motor | Open drip proof (S) | 50/60Hz: 100/110/115/200/220/230V | |||
| 0.3 ~ 0.56kW | |||||
| IP22 Insulation . Class: E | |||||
3 Phase indoor motor (Z) *1 |
50Hz: 200V 60Hz: 200/220V | ||||
| 0.15 ~ 2.42kW | |||||
| IP44 Insulation . Class: E | |||||
| Multi voltage 3 Phase indoor motor (ZM） |
50Hz: 200/380/400/415V | ||||
| 60Hz: 200/220/380/400/440/460V | |||||
| 0.3 ~ 0.56kW | |||||
| IP44 Insulation . Class: E | |||||
| Increased safety motor (A) | 50Hz: 200V 60Hz: 200/220V | ||||
| 0.3 ～ 2.42kW | |||||
| IP44 Insulation . Class: E or F Safety inspection (Japan) | |||||
| USA unit | |||||
| Series | JLD | JHD | JLD-J | JHD-J | |
| Total head | Max. 164 ft | Max. 360 ft | Max. 164 ft | Max. 360 ft | |
| Capacity | Max. 15.8 gpm | Max. 15.8 gpm | |||
| Fluid temp. | ~194 ℉ | ~176 ℉ | |||
| Connection | Rc thread | ||||
| Material | Casing / cover | SUS304 *2 | |||
| Impeller | SUS304 *2 | ||||
| Mechanical seal | SiC × SiC × PTFE | SiC×Carbon×PTFE | |||
| O-Ring | PTFE | ||||
| Shaft | SUS316L | ||||
| Motor | Open drip proof (S) | 50/60Hz: 100/110/115/200/220/230V | |||
| 1/4 ~ 3/4 HP | |||||
| IP22 Insulation . Class: E | |||||
3 Phase indoor motor (Z) *1 |
50Hz: 200V 60Hz: 200/220V | ||||
| 1/2 ~ 3.1/4 HP | |||||
| IP44 Insulation . Class: E | |||||
| Multi voltage 3 Phase indoor motor (ZM） |
50Hz: 200/380/400/415V | ||||
| 60Hz: 200/220/380/400/440/460V | |||||
| 1/4 ~ 3/4 HP | |||||
| IP44 Insulation . Class: E | |||||
| Increased safety motor (A) | 50Hz: 200V 60Hz: 200/220V | ||||
| 1/2 ~ 3.1/4 HP | |||||
| IP44 Insulation . Class: E or F Safety inspection (Japan) | |||||
| *1 All motors for 0.75kW or above are complied with IE3 standard. | |||||
| *2 Option with SS316 material also avaialble. | |||||
Dimensions
